image image image image image
Custom 3D Milling Here's a custom 3D piece that I modeled, programmed, and milled - Pictures and Video! :) Read the Full Story
Anti-Backlash Nuts I ordered some anti-backlash nuts from Dumpster CNC and started working on making some brackets and get them installed. Read the Full Story
CNC Manual Router Table When I was designing my "Ultimate Workbench" I had initially wanted to build in a router table - but then I got to thinking that I already have a router table in my CNC machine! I just needed a way to manually run boards if I wanted to - and here's how I built the manual router table for my CNC machine Read the Full Story
Ultimate Workbench I'm building myself an "Ulitmate Workbench" that will house all of my tools and make things a lot easier around the shop! Read the Full Story
4 X 5 Micro Lathe The price of the Harbor Freight 4 X 5 Micro Lathe dropped to $72 - so I snatched one up and figured it would be good to learn on and play with. It exceeds my expectations! Check it out! Read the Full Story
Sunday, September 05, 2010

Please enter the e-mail address for your account. A verification token will be sent to you. Once you have received the token, you will be able to choose a new password for your account.

Reset your Password

Weather at the Workshop

83°
28°
°F | °C
Clear
Humidity: 71%
Sat

76 | 89
24 | 31
Sun

75 | 87
23 | 30
Mon

74 | 88
23 | 31
Tue

75 | 87
23 | 30

Disclaimer

Some of the things shown on this site are very dangerous and should not be attempted unless you know all of the risks involved. To add, I don't always take the necessary precautions that I should, so just because you see me do something, does not mean it's safe, and I'm suggesting that you DO NOT attempt these things unless you do your due dilligence research and know all of the potential risks.