-
3D Printed Planetary Gears
I wanted to try and print some planetary gears to try and make my 4th axis work better.
Read More -
RepRap - 3D Printer
Here's my journey of building a Reprap 3d Printer. Took about two weeks to get to the point where I was printing and I am still tweaking things to get good prints but it's working well enough to share :)
Read More -
Homemade Bandsaw Bearing Guides
Here's how I made my own bandsaw bearing guides from aluminum tuping and regular skate bearings - for like $20 :)
Read More -
Homemade Power Drive
Using a Parallax Propeller Proto board and a Pololu Stepper Driver - I've built a home made power drive for my lathe / mill / drill - Check it out!
Read More -
Timing Pulleys
I am working on a project for my Enco Mill Drill Lathe - it's a Power Feed driven by a Parallax Propeller and EasyDriver - part of the project involves making some Timing Pulleys to hook it all up! So this post is about the Timing Pulleys! Check out some pictures and videos!
Read More -
Latest 4th Axis
I just realized that I've never uploaded anything about my latest 4th Axis that I've thrown together - so here are some pictures and a video about it!
Read More
- 1
- 2
- 3
- 4
- 5
- 6
I've been busy making a wobbler engine -I wasn't too sure it was going to work so I didn't take much "during" pictures - but here's a video of me testing the function :)
Here's an updated video of the completed engine running on about 15 PSI :) I made the frame for the engine on my homemade CNC machine and all the otehr parts were made on my Enco 3-in1 mill dill lathe.
Most of the engine was made on the manual lathe and mill - but I did make the frame on the CNC machine :)
and here's some pictures!
